Crackle Products

AquaCrackle®
AquaCrackle® is a water-based paint material that is applied over AquaSize™ in Faux Effects® two-part crackle paint system (see AquaSize™). Simply brush, roll or spray on a generous coat of AquaCrackle® paint over AquaSize™ once it has set and is tacky.

Generous coats of both AquaSize™ and AquaCrackle® will produce largest crackle patterns; lighter coats will produce smaller crackle patterns. Applying AquaCrackle® in one direction will produce linear, ladder-type cracks. Sponging or rolling on the material in different directions will give a random, rounded pattern. It is best to complete a separate work sample to insure desired results.

AquaCrackle® is available in Clear, White, and Black.

Available in quart and gallon sizes.

Covers Approximately: Covers up to 200 sq.ft. per gallon
Download The SDS Sheet

AquaCrackle® Size
AquaSize™ is a sizing material used as the base for a crackle finish. This glue-like material must be used to create crackle effects in Faux Effects® two-part crackle system. When dry to a tacky condition, AquaCrackle® or a CrackleMate™/paint mixture is applied over top. As it dries, cracks form creating a classic crackle paint appearance.

Easy clean up with soap and water.

Covers Approximately 300 - 400 sq ft per gallon

AquaSize is sold in quart and gallon sizes.
Download The SDS Sheet

CrackleMate®
CrackleMate™ is a clear additive that transforms SetCoat® bonding paint or acrylic latex paint to create crackling paint. The CrackleMate™/paint mixture is then applied over AquaSize™ once it has set and is tacky.

Normal addition is 30% CrackleMate™ to 70% paint. Do not exceed 60% when adding to any paint material. CrackleMate™ added to SetCoat® bonding paint produces very good results. When adding CrackleMate™ to latex paint, varying degrees of success depend upon the particular brand of paint and the amount added.

Available in quarts.
Download The SDS Sheet

* Crackle Products