* Marble, Stone & Texture
AquaStone®
AquaStone® is a textured material containing actual marble dust suspended in an acrylic resin. A full-bodied material that holds its shape when troweled or texturized, AquaStone® can be used to create a wide variety of relief-based finishes including stucco patterns, limestone, coral stone, as well as brick and block walls. AquaStone® is the perfect choice for embossed stenciling.
Covers Approximately 50 - 150 sq ft per gallon
Sold in gallons.
Download The SDS Sheet
Download The Fire Rating
True Tint Stone™
True Tint Stone ™ is a thick textured material with the capacity to tint to a true deep color when combined with FauxCreme Color™/AquaColor™ tinting products. Authentic looking brick and adobe finishes can be created as well as the simulation of life-like rock and mineral formations.
- Soap and water clean up
- Interior/Exterior rated
- Resists fading
- Easily sanded
- Excellent bonding qualities
- Do not apply in temperatures below 55°F
Coverage: 50–150 sq.ft. per gallon, depending on application and technique.
Sizes Available: Gallon
Download The SDS Sheet
PlasterTex®
PlasterTex™ is a texture material specially formulated to create a grained plaster finish and can be tinted with FauxCreme Color™. It can be used as a base coat for a Venetian Gem® finish or as a final coat when a rough, distressed look is preferred. PlasterTex™ may be applied over most ordinary dry acrylic latex paints, but it is always suggested to check the bond in a small area before beginning or completing an entire work project with any paint or plaster material.
Covers up to 200 sq ft per gallon
Available in gallon sizes.
Download The SDS Sheet
Download The Fire Rating
SandStone™
Sandstone™ is a water-based decorative material with special, non-abrasive sand-like particles. Formulated to create a sandy texture on walls and furniture, it is also used as a basecoat in the production of faux marble and stone. Sandstone™ can be scraped to bring out the color of the embedded particles hidden within or sanded to a smooth sandstone finish. SandStone™ may be applied over most old painted surfaces or newly primed drywall. Sandstone™ can be tinted with FauxCreme Color™ and commercially available colorants for water based paint materials. It is an excellent working base for color glazing or Venetian Plaster™ finishes.
Sandstone™ may be applied by brush, roll, trowel or spray. For spray on application use a large fluid tip of at least 100 thousandths diameter. SandStone™ may be thinned up to 30% with tap water for spray applications.
Covers up to 200 sq ft per gallon
Available in gallon sizes.
Download The SDS Sheet
Download The Fire Rating
TextureFil™
TextureFil™ is a time saving fill-in acrylic formulation designed to smooth out textured surfaces. No primer or SetCoat® is required prior to or after its application. This remarkable product works as both a primer and a basecoat; it is a hard, chemical-resistant, resurfacing product. It makes even heavy textures and stippled wall surfaces ready for smooth faux finishing with a few simple troweled-on coats. TextureFil™ may be directly coated or decoratively finished with any Faux Effects® product, so there no need for additional primers or basecoats.
Covers up to 50–100 sq.ft. per gallon
Available in gallon sizes.
Download The SDS Sheet
FauxCrete™
FauxCrete™ (RsCrete®) is a superior formulation that incorporates advanced polymer technology, creating a concrete-like material suitable for interior and exterior applications. FauxCrete™ is translucent in nature, but is tintable and versatile. FauxCrete™ will form a beautiful, durable veneer over any properly prepared substrate, especially concrete.
FauxStone™ Pull-Off
FauxStone™ Pull-Off is an exceptional product used to create classic olde world finishes that resemble chipped paint/plaster. Versatile enough to re-create textured iron or stone-like finishes. FauxStone™ Pull-Off has a unique formulation that allows it to be cleanly removed from the substrate providing the decorative artist with greater creative control over the material.
RS SandStone™ Flake
RsSandStone® Flake is a product with special characteristics and metallic flakes that allow it to be easily applied over knockdown textures, smoothing and leveling the wall or ceiling surface. Its translucent white coloration and anti-collapse formulation make it eminently suited for this purpose. The crushable sand-like aggregate is actually tiny hollow stones that allow the product to be utilized in a number of decorative ways, and the metallic flakes add sparkle and simulate the characteristics of granite. Similar to the other products in the Rs Series line, RsSandStone® Flake can be mixed with RsActivator® to easily create unique, textured effects.
RS Travertine'O™
RsTravertino™ has been specifically formulated to provide the artisan with a product that simulates cut, unpolished Travertine. This dimensional, easy to use material can also be used in any number of creative applications. It works extremely well as a base layer when using RsPlaster™ or RsStone™.
TextureCoat™
Texture Coat™ is a specially formulated basecoat with superb high pH blocking and bonding capabilities. Texture Coat™ is a durable base coat for plasters and can be used alone as a textured wall and trim finish. Unlike common latex paints, the high grade proprietary resins and manufacturing process of Texture Coat™ provides very good bonding and durability, as well as excellent water resistance.
QuartzStone™
Quartzstone® is a fabulous translucent product, which when dry, provides the look of quartz or cameo stone surfaces. A rich look for columns, table bases, slate type floors and stonewalls.